Solvent Based Sealer Remover FC1350

Our Solvent Based Sealer Remover Safely removes solvent based acrylic sealers.

Recommended Surfaces

  • Concrete
  • Ceramic Tile
  • Porcelain Tile
  • Natural & quartz composite stone
  • Vinyl Tile
  • Counters, floors and also walls
  • Residential, commercial as well as institutional
  • Both Interior & exterior use

Characteristics

  • A viscous formula to provide long-lasting action
  • Slow evaporation for long term action
  • Low odor

Coverage

  • 946ml covers 1 to 5m² (10 to 50ft²)

Environmental Data

  • VOC:0
  • Biodegradable and also in conformity with OCDE 301 E Regulation
  • Meets EcoLogo specifications Paint & Varnish Remover CCD:051

Packaging

  • 946ml bottle (FC1350-01)
  • 4l bottle (FC1350-04)
  • 20l pail (FC1350-20)

Solvent Based Sealer Remover Directions

Spread a generous coat of remover evenly over the surface using the Green Scrub Pad (FC215) or the Black Scrub Pad (FC205). Then let the remover work for 30 to 60 minutes, scrubbing the surface every 10 minutes with the scrub pad or hard bristle brush. The time required to soften the sealer depends on the chemical composition and thickness of the sealer as well as the temperature and texture on the surface. When sealer is lifting, apply the Heavy Duty Cleaner (FC350) diluted at 1 part cleaner and 10 parts water to remove residue. After wipe off and rinse thoroughly with clear water. Repeat if necessary. Then allow it to dry for 24 hours before applying a new sealer or acrylic finish.

Caution & Limitations

  • Test product on a small inconspicuous area
  • When applying the product protect adjacent areas against unexpected contact with the product
  • Product should be used at room temperature

Back home