Our Efflorescence and Rust Remover is the ideal product for removing calcium buildups, rust stains while being extremely effective while inside or outside the home.
Recommended Surfaces
- Ceramic & porcelain tile
- Paving stone & masonry
- Cement grout joints
- Concrete
- Removes rust on metal as well as tile surfaces
- Removes calcium rings in bathtubs and toilets
- Residential, commercial also institutional
- Interior or exterior use
Characteristics
- Organic acid based cleaner
- Considered non-corrosive for skin, as per WHMIS
- pH<1, therefore, is considered corrosive by Health Canada
- Doesn’t contain phosphoric, hydrochloric or hydroflouoric acid
- Low odor
Coverage
- 946ml covers 25m² (250ft²)
Environmental Data
- VOC:0
- Biodegradable and also in conformity with OCDE 301 E Regulation
Packaging
- 946ml bottle (FC2000-01)
- 4l bottle (FC2000-04)
Efflorescence and Rust Remover Directions
Spread the remover on the surface using a Black Scrub Pad (FC205). Then allow it to work for 3 to 5 minutes and scrub with the scrub pad. Do not allow remover to dry on surface. Afterward rinse thoroughly with clear water and pick up. Repeat if necessary.
Caution & Limitations
- Test product on small inconspicuous area
- While applying the product protect adjacent areas against unexpected contact with the product
- Product should be used at room temperature
- Will etch marble and calcareous stone
- Will damage chrome
Disclaimer
N.B. All above information is accurate. However, having no control over the conditions of utilization of the product, we cannot assume any responsibility, legal or other, in regards of the results and/or any prejudice from which derived.