FC355 Urethane & Acrylic Grout Residue Remover

Removes water based urethane sealers and finishes as well as pre-mixed acrylic grout residue.

Recommended Surfaces

  • Natural stone
  • Ceramic & porcelain tiles
  • Quartz composite stone
  • Terrazzo
  • Concrete
  • Luxury vinyl & vinyl plank
  • Floors & walls
  • Residential, commercial & institutional

Characteristics

  • Alkaline formula
  • pH: 9-9.5
  • No phosphates or ammonia
  • Fast evaporation
  • Low odor

Coverage

  • Varies with the cleaning concentration required and the surface condition

Environmental Data

  • VOC: 0
  • Biodegradable. In conformity with OCDE 301 E Regulation
  • Meets EcoLogo specifications Degreasing Cleaner CCD: 147B

Packaging

  • 946ml bottle (FC355-01)
  • 4L bottle (FC355-04)
  • 20L pail (FC355-20)

Directions

Water Based Finish & Sealer Removal

Use undiluted or mix 1 part remover with 1 part warm water. With a mop spread generously and let work for 5 to 10 minutes. Scrub area with a Black Scrub Pad (FC205) or a buffing machine with a black scrub pad set on low speed. Work in sections; never allow the solution to dry on the surface. Remove solution with a wet vacuum if possible. Rinse thoroughly with warm clear water. Allow to dry for 24 hours before applying a sealer or floor finish.

Pre-Mixed Grout Residue Removal

Use undiluted or mix 1 part remover with 1 part warm water. Apply directly on the grout residue and let work for 5 to 10 minutes. Scrub area with a Black Scrub Pad (FC205). Work in sections; never allow the solution to dry on the surface. Remove solution with a wet vacuum if possible. Rinse thoroughly with warm clear water. Allow to dry for 24 hours before applying a sealer or floor finish.

Caution & Limitations

  • Test product on small inconspicuous area
  • Protect adjacent areas against unexpected contact with product
  • Product should be used at room temperature