Hardwood & Laminate Shine Restorer – High Gloss FC220

Our Hardwood Shine Restorer High Gloss product is a water-based acrylic formula designed to protect and rejuvenate hardwood, laminate and also engineered wood floors leaving a high gloss finish.

Recommended Surfaces

    • Hardwood floors
    • Laminate floors
    • Parquet wood floors
    • Cork and also bamboo floors
    • Engineered wood floors
    • Residential, commercial as well as institutional use
  • Interior use only


  • Water-based acrylic finish
  • No ammonia
  • Satin gloss; gloss rating 15-20
  • Low odor
  • Good leveling


  • 946ml covers approximately 20m² (200ft²)

Environmental Data

  • Low VOC: < 5gr / L
  • Biodegradable and also in conformity with OCDE 301 E rule
  • Meets EcoLogo specifications Floor Finishes & Sealers CCD:147A


  • Heavy Duty Cleaner (FC350)


  • Hardwood Floor Cleaner (FC200)
  • Laminate Floor Cleaner (FC333)


  • 946ml bottle (FC220-01)
  • 4L bottle (FC220-04)
  • 20L pail (FC220-20)

Hardwood Shine Restorer High Gloss  Directions

Surface Preparation

Firstly deep clean floors and then remove existing floor finish or sealer with Heavy Duty Cleaner & Acrylic Finish Stripper (FC350). When clean wash with clear water. If finish does not need to be removed, then use Pre-Finish Cleaner (FC250).

Youtube channel here

Caution & Limitations

  • First test product on a small inconspicuous area
  • When applying the products protect adjacent areas against unexpected contact with products
  • The product should be used at room temperature

Cure Time

  • Lightfoot traffic for 2-3 hours afterward
  • Cure time 28 days


N.B.  All above information is accurate. However, having no control over the conditions of utilization of the product, we cannot assume any responsibility, legal or other, in regards of the results and/or any prejudice from which derived.

Hardwood Shine Restorer – High Gloss MSDS

Back home