FC240 Hardwood Shine Restorer – Satin Gloss

Water based acrylic finish formulated to protect and rejuvenate hardwood, laminate & engineered floors leaving a satin gloss finish

Recommended Surfaces

  • Hardwood floors
  • Laminate floors
  • Parquet wood floors
  • Cork floors
  • Engineered wood floors
  • Residential, commercial & institutional use
  • Interior use only

Characteristics

  • Water based acrylic finish
  • No ammonia
  • Satin gloss; gloss rating: 15-20
  • Low odor
  • Good leveling

Coverage

  • 946ml covers approximately 20m² (200ft²)

Environmental Data

  • Low VOC: <5gr / L
  • Biodegradable in conformity with OCDE 301 E rule
  • Meets Ecologo specifications Floor Finishes & Sealers CCD:147A

Remover

  • Heavy Duty Cleaner (FC350)

Maintenance

  • Hardwood Floor Cleaner (FC200)
  • Laminate Floor Cleaner (FC333)

Packagaing

  • 946ml bottle (FC240-01)
  • 4L bottle (FC240-04)
  • 20L pail (FC240-20)

Directions

Surface Preperation

Deep clean floor and remove existing floor finish or sealer with Heavy Duty Cleaner & Acrylic Finish Stripper (FC350). When clean wash with clear water. If finish does not need to be removed use Pre-Finish Cleaner (FC250).

Application

Using the FCS Mop (FC230) with the Application Mop Cloth (FC225), apply one coat evenly on the entire surface. Allow 30 to 45 minutes to totally dry before applying another coat. Two coats are usually enough. No polishing is required but will enhance performance.

Caution & Limitations

  • Test product on small inconspicuous area
  • Protect adjacent area against unexpected contact with product
  • Product should be used at room temperature

Cure Time

  • Light foot traffic 2-3 hours
  • Cure time 28 days