Laminate Shine Restorer – High Gloss is a water-based acrylic formulated to protect and rejuvenate hardwood, laminate & engineered wood floors leaving a high gloss finish afterward.

Recommended Surfaces

    • Hardwood floors
    • Laminate floors
    • Parquet wood floors
    • Cork, bamboo floors and also Engineered wood floors
    • Residential, commercial as well as institutional use
  • Interior use only


  • Water-based acrylic finish
  • No ammonia
  • Satin gloss; gloss rating 15-20
  • Low odor
  • Good leveling


  • 946ml covers approximately 20m² (200ft²)

Environmental Data

  • Low VOC: < 5gr / L
  • Biodegradable and also in conformity with OCDE 301 E rule
  • MeEcoLogo specifications Floor Finishes & Sealers CCD:147A


  • Heavy Duty Cleaner (FC350)


  • Hardwood Floor Cleaner (FC200)
  • Laminate Floor Cleaner (FC333)


  • 946ml bottle (FC220-01)
  • 4L bottle (FC220-04)
  • 20L pail (FC220-20)


Surface Preparation

Firstly deep clean floors and remove existing floor finish or sealer with Heavy Duty Cleaner & Acrylic Finish Stripper (FC350). When clean wash with clear water. If finish does not need to be removed, then use Pre-Finish Cleaner (FC250). After apply Laminate Shine Restorer High Gloss.

Youtube channel here

Caution & Limitations

  • Test product on small inconspicuous area
  • While applying the product protect adjacent areas against unexpected contact with the product
  • The product should be used at room temperature

Cure Time

  • Only Lightfoot traffic 2-3 hours afterward
  • Cure time 28 days

Back home