Urethane Laminate Finish Semi Gloss FC270

Urethane Laminate Finish Semi Gloss is a water-based urethane finish formulated to protect and rejuvenate hardwood, laminate & engineered wood floors leaving a semi gloss finish.

Recommended Surfaces

  • Varnished as well as pre-varnished hardwood floors
  • Laminate floors
  • Parquet wood floors
  • Cork, bamboo floors also Engineered wood floors
  • Residential, commercial and also institutional use
  • Interior use only

Characteristics

  • Water-based urethane finish
  • Gloss rating: 50-55
  • Protects against household dirt, staining as well as abrasion
  • No ammonia
  • Low odor
  • Good leveling
  • Dries quickly
  • NMP & NPEO free

Coverage

  • 946ml covers approximately 20m² (200ft²)

Environmental Data

  • Low VOC: < 250gr / L
  • Biodegradable and also in conformity with OCDE 301 E rule
  • Designed to meet the EcoLogo specifications

Remover

  • Heavy Duty Cleaner (FC350)

Maintenance

  • Hardwood Floor Cleaner (FC200)
  • Laminate Floor Cleaner (FC333)

Packaging

  • 946ml bottle (FC270-01)
  • 4L bottle (FC270-04)
  • 20L pail (FC270-20)

Urethane Laminate Finish Semi Gloss Directions

Surface Preparation

First deep clean floor and remove existing floor finish or sealer with Heavy Duty Cleaner (FC350). When clean wash with clear water. If finish does not need to be removed, then use Pre-Finish Cleaner (FC250). Let dry completely before applying the finish.

Application

Using the FCS Mop (FC225), apply one coat evenly on the entire surface. Then allow 30 to 45 minutes for it to totally dry before applying another coat. Two coats are usually enough. No polishing is required, but it will enhance performance.

Caution & Limitations

  • Test product on a small inconspicuous area
  • While applying the product protect adjacent areas against unexpected contact with the product
  • The product should be used at room temperature

Cure Time

  • Lightfoot traffic for 12 hours afterward
  • Normal circulation 3-5 days
  • Cure time 28 days

Back home