FC260 Urethane Laminate Finish – High Gloss

Water based urethane finish formulated to protect and rejuvenate hardwood, laminate & engineered wood floors leaving a high gloss finish

Recommended Surfaces

  • Varnished & pre-varnished hardwood floors
  • Laminate floors
  • Parquet wood floors
  • Cork & bamboo floors
  • Engineered wood floors
  • Residential, commercial & institutional use
  • Interior use only

Characteristics

  • Water based urethane finish
  • Gloss rating: >70
  • Protects against household dirt, staining & abrasion
  • No ammonia
  • Low odor
  • Good leveling
  • Dries quickly
  • NMP & NPEO free

Coverage

  • 946ml covers approximately 20m² (200ft²)

Environmental Data

  • Low VOC: < 250gr / L
  • Biodegradable in conformity with OCDE 301 E rule
  • Designed to meet the Ecologo specifications

Remover

  • Heavy Duty Cleaner (FC350)

Maintenance

  • Hardwood Floor Cleaner (FC200)
  • Laminate Floor Cleaner (FC333)

Packaging

  • 946ml bottle (FC260-01)
  • 4L bottle (FC260-04)
  • 20L pail (FC260-20)

Directions

Surface Preperation

Deep clean floor and remove existing floor finish or sealer with Heavy Duty Cleaner (FC350). When clean wash with clear water. If finish does not need to be removed use Pre-Finish Cleaner (FC250). Let dry completely before applying the finish.

Application

Using the FCS Mop (FC230) with the Application Mop Cloth (FC225), apply one coat evently on the entire surface. Allow 30 to 45 minutes to totally dry before applying another coat. Two coats are usually enough. No polishing required but will enhance performance.

Caution & Limitations

  • Test product on small inconspicuous area
  • Protect adjacent areas against unexpected contact with product
  • Product should be used at room temperature

Cure Time

  • Light foot traffic 12 hours
  • Normal circulation 3-5 days
  • Cure time 28 days