Description
This product removes cement grout residue from polished porcelain & stone. May also be used to soften polymer modified cement grout joints to re-grout.
Recommended Surfaces
- Polished natural stone
- Safe on marble & calcareous stone
- Polished porcelain tile & ceramic tile
- Concrete
- Cobblestone, limestone & travertine
- Counters, floors as well as walls
- Residential, commercial and also institutional
- Interior or exterior use
- Polymer modified cement grout removal
Grout Residue Remover for Polished Stone Directions
To Remove Grout Residue Remover
Pour the solution directly on the tiles and spread with a White Scrub Pad (FC210) and scrub the surface gently while avoiding the grout joints as much as possible. Then let work for 5 minutes or until the grout residue has been lifted. Rinse thoroughly with 1 part Heavy Duty Cleaner (FC350) to 3 parts water. After rinse again with clear water.
To Remove Grout Joints
First, remove any sealer on grout joints with appropriate FCS Solutions Ltd. Remover. Use full strength and pour directly on the joints. Then allow it to work for 15 minutes or more before scraping the surface with a joint scraper. Repeat as needed. When the joints are clear of grout, rinse thoroughly with 1 part Heavy Duty Cleaner (FC350) to 3 parts water. After clear the joints of any residue, preferably with a wet vacuum and wait until the joints are completely dry before applying new grout.
Reviews
There are no reviews yet.