Marble & Polished Stone Sealer No Gloss (FC595) is a solvent-based impregnating sealer formulated to protect stone leaving a natural look afterward. No gloss or color enhancement.
- Marble & calcareous stone
- All dense natural stone
- Honed & polished finish
- Grout Joints
- Floors, walls, counters and also residential showers
- Residential, commercial as well as in institutional applications
- Interior use & exterior use
Marble & Polished Stone Sealer No Gloss Directions
Resealing Surface: First deep clean or remove any existing topical water-based sealer using Heavy Duty Cleaner (FC350).
New Installation: Surface must be clean, dry, and free of all foreign matter. Use the Pre-Finish Cleaner (FC250), Apply only after the grout manufacturer’s recommended curing time. Minimum of 7 days afterward.
Marble & Polished Stone Sealer No Gloss Application
Using the FCS Mop (FC230) with the Application Cloth (FC225), or the White Scrub Pad (FC210) for smaller areas, apply a generous, even coat over the entire surface. Then allow the sealer to sit on the surface for 10 to 15 minutes. Add more sealer or spread excess on the surface if needed. Afterward, remove excess sealer with a dry cloth and then let it dry for 30 minutes.
To verify if Sealer Protection is Adequate: Put a few drops of water on the sealed surface and then wait a few minutes. If the surface doesn’t darken, then the protection is adequate. Otherwise, add another coat of sealer.
Marble & Polished Stone Sealer No Gloss SDS
There are no reviews yet.