Penetrating Sealer Color Enhancer No Gloss (FC480) is a water-based penetrating sealer formulated to enhance color and protect the natural stone, porcelain tile, and also cement grout joints leaving a natural look.
- Unsealed concrete or masonry
- All types of natural stone, best on polished and honed surfaces
- Quartz composite stones
- Ceramic, porcelain and quarry tiles
- Cement grout joints
- Floors, walls, counters, backsplashes and also for showers
- Residential, commercial as well as institutional applications
- Interior also exterior use
Penetrating Sealer Color Enhancer No Gloss Directions
New Grout: Wait for 7 – 14 days to allow proper curing of grout before applying the sealer. (Refer to grout manufacturer’s recommendation.)
Existing Grout: First deep clean or remove any existing topical water sealer using FC350 Heavy Duty Cleaner. Rinse well afterward.
Penetrating Sealer Color Enhancer No Gloss Application
Apply a generous coat of sealer evenly with an FC230 Telescopic Mop and the FC225 Microfiber Application Cloth, or the FC210 White Scrub Pad. Then allow the sealer to sit on the surface for 15-20 minutes. Do not allow the sealer to dry during that time, add more sealer or spread excess on the surface if needed. Afterward, remove excess sealer from the surface with a soft cloth.
To Verify if the Sealer Protection is Adequate
Put a few drops of water on the sealed surface for a few minutes. If the surface doesn’t darken, then the protection is adequate. Otherwise, add another coat of sealer.