Vinyl Acrylic Floor Finish – High Gloss is a water-based acrylic finish formulated to protect and enhance vinyl and resilient surfaces leaving a high gloss finish.
- Resilient Floors
- Vinyl Tiles, Linoleum, Vinyl sheet and also VCT
- Compatible with floor covering from all manufacturers
- Residential, commercial as well as in institutional applications
- Interior use
Vinyl Acrylic Floor Finish – High Gloss Directions
Surface Preparation: First deep clean or remove any existing topical water-based sealer using Heavy Duty Cleaner (FC350).
New VCT Installation: Follow recommendations from the manufacturer. First, wash the floor with Pre-Finish Cleaner (FC250). Then apply one coat of Acrylic Sealer (FC150) followed by two coats of Vinyl Acrylic Floor Finish (FC130) afterward.
Apply a coat of sealer evenly with an FCS Mop (FC230) and the Applicator Mop Cloth (FC225) over the entire surface. Then allow 30 to 45 minutes to dry or until the surface is totally dry before applying another coat. The application of two coats is usually enough. No buffing required.