FC1450 Black Glue & Carpet Adhesive Remover

Recommended Surfaces

  • Concrete
  • Ceramic tile
  • Porcelain tile
  • Natural & quartz composite stone
  • Vinyl tile
  • Floors & walls
  • Residential, commercial & institutional
  • Interior & exterior use


  • Viscous formula for long lasting action
  • Slow evaporation for long lasting action
  • Low odor


  • 946ml covers 3 to 5m²

Environmental Data

  • VOC:0
  • Biodegradable. In conformity with OCDE 301 E Regulation
  • Meets EcoLogo specifications Industrial Cleaner CCD:146F


  • 946ml bottle (FC1450-01)
  • 4l bottle (FC1450-04)
  • 20l pail (FC1450-20)


Spread a generous coat of remover over the surface using the Green Scrub Pad (FC205). Let the remover work for 30 to 60 minutes, scrubbing the surface every 10 minutes with the scrub pad or a hard bristle brush. Time required to soften the sealer depends on the chemical composition and thickness of the sealer as well as the temperature and texture on the surface. When glue is lifting, apply the Heavy Duty Cleaner (FC350) diluted at 1 part cleaner and 10 parts water to remove residue. Wipe off and rinse thoroughly with clear water. Repeat if necessary. Allow to dry for 24 hours before applying a new sealer or acrylic finish.

Caution & Limitations

  • Test product on small inconspicuous area
  • Protect adjacent areas against unexpected contact with product
  • Product should be used at room temperature