Premium PL Remover FC1800

Our Premium PL Remover removes PL’s, urethane construction glue and urethane foam insulation on hardwood, laminates, stone and more.

Recommended Surfaces

  • Pre-varnished hardwood as well as laminate
  • Vinyl
  • Concrete
  • Ceramic and porcelain
  • Natural stone
  • Quartz composite stone
  • Brick
  • Carpet
  • NOT recommended for acrylic bath or shower base finish
  • Counters, floors as well as walls
  • Residential, commercial and also institutional
  • Interior and exterior use

Characteristics

  • Works quickly
  • Low odor
  • Safe for metal

Coverage

  • Varies with the cleaning concentration required and also the surface condition

Environmental Data

  • VOC:0
  • Biodegradable and also in conformity with OCDE 301 E Regulation
  • Meets EcoLogo specifications Paint & Varnish Remover CCD:051

Packaging

  • 250ml bottle (FC1800-25)
  • 946ml bottle (FC1800-01)
  • 4l bottle (FC1800-04)
  • 20l pail (FC1800-20)

Premium PL Remover Directions

Firs spread on the glue residue with a White Scrub Pad (FC210). Then allow it to work for a few minutes and scrub gently with the scrub pad. When glue residue starts to lift pick it up with a paper towel and wipe the surface with damp cloth. Repeat if necessary. Allow the surface to dry for 24 hours afterward before applying a sealer finish.

Caution & Limitations

  • Test product on a small inconspicuous area
  • While applying the product protect adjacent areas against unexpected contact with the product
  • The product should be used at room temperature
  • When applying the product protect baseboards
  • Avoid putting too much remover on wood or laminate planks to avoid swelling

Disclaimer

N.B.  All above information is accurate. However, having no control over the conditions of utilization of the product, we cannot assume any responsibility, legal or other, in regards of the results and/or any prejudice from which derived.

Premium PL Remover MSDS

Back home