Urethane & Acrylic Grout Residue Remover FC355

Our Urethane & Acrylic Grout Residue Remover easily removes water-based urethane sealers and finishes as well as pre-mixed acrylic grout residue.

Recommended Surfaces

  • Natural stone
  • Ceramic and also porcelain tiles
  • Quartz composite stone
  • Terrazzo
  • Concrete
  • Luxury vinyl & vinyl plank
  • Floors & walls
  • Residential, commercial as well as institutional

Characteristics

  • Alkaline formula
  • pH: 9-9.5
  • No phosphates or ammonia
  • Fast evaporation
  • Low odor

Coverage

  • Varies with the cleaning concentration required and also the surface condition

Environmental Data

  • VOC: 0
  • Biodegradable also in conformity with OCDE 301 E Regulation
  • Meets EcoLogo specifications Degreasing Cleaner CCD: 147B

Packaging

  • 946ml bottle (FC355-01)
  • 4L bottle (FC355-04)
  • 20L pail (FC355-20)

Urethane & Acrylic Grout Residue Remover Directions

Water Based Finish & Sealer Removal

Use undiluted or mix 1 part remover with 1 part warm water. With a mop spread generously and then allow it to work for 5 to 10 minutes. Scrub area with a Black Scrub Pad (FC205) or a buffing machine with a black scrub pad set on low speed. Work in sections; never allow the solution to dry on the surface. Remove solution with a wet vacuum if possible. Rinse thoroughly with warm clear water. Then allow the surface to dry for 24 hours before applying a sealer or floor finish.

Pre-Mixed Grout Residue Removal

Use undiluted or mix 1 part remover with 1 part warm water. Apply directly on the grout residue and then allow it to work for 5 to 10 minutes. Scrub area with a Black Scrub Pad (FC205). Work in sections; never allow the solution to dry on the surface. Remove solution with a wet vacuum if possible. Rinse thoroughly with warm clear water. Allow the surface to dry for 24 hours before applying a sealer or floor finish.

Caution & Limitations

  • Test product on a small inconspicuous area
  • While applying the product protect adjacent areas against unexpected contact with the product
  • The product should be used at room temperature

Disclaimer

N.B.  All above information is accurate. However, having no control over the conditions of utilization of the product, we cannot assume any responsibility, legal or other, in regards of the results and/or any prejudice from which derived.

Urethane and Acrylic Grout Residue Remover MSDS

Back home