Shower Maintenance Kit FC374

Our Shower Maintenance Kit is for tiled and fiberglass showers. Eases cleaning of walls, glass doors and also shower taps.

Shower Maintenance Kit (FC374) contains 700ml spray bottle (FC373-07) & 500ml Tile & Grout Cleaner (FC305-05).

Directions: Clean with FC305 and rinse, apply FC373 and then let dry

Recommended Surfaces

  • Glass shower doors and windows
  • Ceramic & porcelain
  • Granite
  • Quartz composite
  • Fiberglass
  • Chrome shower taps
  • Mirrors & windows
  • NOT recommended on marbles & calcareous stone
  • Residential, commercial as wel as in institutional applications
  • Interior and also exterior applications

Characteristics

  • Light acid formula
  • No phosphates or alcohol
  • Dries quickly
  • No rinsing required
  • Does not leave streaks or soap residue afterward

Coverage

  • Varies with the cleaning concentration required and also the surface condition

Environmental Data

  • VOC: 0
  • Biodegradable also in conformity with OCDE 301 E Regulation
  • Meets EcoLogo specifications Glass & Window Cleaner CCD:146A

Packaging

  • Shower Maintenance Kit (FC374) contains 700ml spray bottle (FC373) and also a 500ml Tile & Grout Cleaner (FC305).

Shower Maintenance Kit Directions

Cleaning: Spray directly on the surface to clean; then scrub with a White Scrub Pad (FC210). Rinse with water. Wipe dry with clean cloth or squeegee after. Spray on clean surface, then spread with white scrub pad. Do not dry the surface. Allow the cleaner to dry before using the shower. After showering, rinse the walls and tub with water.

Concentrate Dilution: 100ml of Spot Free Shower Cleaner Concentrate with 600ml of warm water. Or place one Spot Free Shower Cleaner Recharge in an empty 700ml spray bottle and fill with warm water.

Caution & Limitations

  • Test product on a small inconspicuous area
  • While applying the product protect adjacent areas against unexpected contact withthe product
  • Product should be used at room temperature

 

 

 FC305-05

Mild acid cleaner formulated to clean cement grout joints, ceramic tile and porcelain tile.

Recommended Surfaces

  • Natural stone (EXCEPT marble, calcareous stone, & polished stone.
  • Cement rout, ceramic tile (EXCEPT polished porcelain tile & glass)
  • Quartz composite stone
  • Countertops floors, walls, shower doors, toilets & bathtubs
  • Residential, commercial, institutional as well as in industrial applications
  • Interior and also exterior applications

Characteristics

  • Organic acid based cleaner
  • Concentrated formula
  • No phosphates or ammonia
  • Fast evaporation
  • Doesn’t leave streaks or soap residue
  • Removes calcium residue, soap scum, shampoo film as well as dirt
  • Erases light cement grout haze on tiles after grouting
  • Removes light rust and calcium rings in toilets, bathtubs, shower doors and also on faucets

Coverage

  • Varies with the cleaning concentration required and also the surface condition.

Environmental Data

  • VOC: 0
  • Biodegradable also in conformity with OCDE 301 E rule
  • Meets EcoLogo specifications Bathroom Cleaner CCD: 146J

Packaging

  • 500ml bottle

FC305-05 Directions

Grout Deep Cleaning: Use straight concentrate or dilute with an equal part water. Spread the cleaner directly on the joints and then let work for 1 to 2 minutes. Scrub the joints with FCS Black Scrub Pad (FC205), Green Scrub Pad (FC215) or White Scrub Pad (FC210). Rinse thoroughly with clear water.

Regular Cleaning: First mix 125ml of cleaner with 4L of water. Clean the floor as usual with FCS Mop (FC230) and the Cleaning Mop Cloth (FC235) or a sponge. For stubborn stains allow the cleaning solution to work for 2 to 5 minutes, then scrub and wipe. Increase cleaning solution concentration if needed. If the surface is sticky after drying, it is because there is some soap residue left on the surface. Rinse the surface with warm to hot water and wipe off.

To Remove Efflorescence, Cement Grout Haze, Rust & Calcium: Use straight concentrate. Pour directly on the surface, then let work for 2 to 5 minutes, scrub with FCS Black Scrub Pad (FC205), rinse with clear water and wipe off afterward.

Caution & Limitations

  • Test product on a small inconspicuous area
  • While applying the product protect adjacent areas against unexpected contact with the product
  • The product should be used at room temperature

Back home