Urethane Vinyl & Rubber Finish – High Gloss FC160

Urethane Vinyl & Rubber Finish – High Gloss is a high-performance floor finish formulated for rubber sports flooring, vinyl plank and luxury vinyl flooring leaving a high gloss finish.

Recommended Surfaces

  • Resilient floors
  • Luxury vinyl
  • Vinyl sheet
  • Sport rubber flooring
  • Vinyl Plank
  • VCT
  • Linoleum
  • Residential, commercial as well as in institutional applications
  • Interior use

Characteristics

  • Water based acrylic finish
  • Gloss rating: >70
  • Doesn’t contain ammonia
  • Good leveling
  • Protects against household dirt, water, and also oil infiltrations
  • Faint odor
  • NPEO free
  • NMP free

Coverage

  • 946ml covers approximately 20m² (200ft²)

Environmental Data

  • VOC: <5gr
  • Biodegradable also in conformity with OCDE 301 E Regulation
  • Meets EcoLogo specifications Floor finishes & sealers CCD:147A

Remover

  • Heavy Duty Cleaner (FC350)
  • Urethane & Acrylic Grout Residue Remover (FC355)

Maintenance

Commercial & Institutional

  • Neutral Floor Cleaner (FC300)

Residential

  • Vinyl, Tile & Stone Cleaner (FC110)

Packaging

  • 946ml bottle (FC160-01)
  • 4L bottle (FC160-04)
  • 20L pail (FC160-20)

Urethane Vinyl & Rubber Finish – High Gloss Directions

Surface Preparation: First deep clean or remove any existing topical water based sealer using Heavy Duty Cleaner (FC350). For new installations use the Pre-Finish Cleaner (FC250).

New VCT Installation: Follow recommendations from the manufacturer. First, clean the floor with Pre-Finish Cleaner (FC250). Then apply one coat of Acrylic Sealer (FC150) followed by two coats Urethane Vinyl & Rubber Floor Finish (FC160).

Application

Using the FCS Mop (FC230) with the Application Cloth (FC225) apply one even coat over the entire surface. Allow 30 to 45 minutes to dry or until the surface is totally dry before applying another coat. Application of two coats is usually enough. No polishing required.

Caution & Limitations

  • Test product on a small inconspicuous area
  • While applying the product protect adjacent areas against unexpected contact with the product
  • The product should be used at room temperature

Cure Time

  • light foot traffic 2 to 3 hours after last coat is dry
  • Normal circulation after 24 hours
  • Cure time 28 days

Back home